EVO-IV

CLOSED-LOOP HYDRAULIC SYSTEM

An SPVM/SPLM-based closed-loop hydraulic architecture supports a clean, compact layout and simplified maintenance access.

UP TO 15 DB NOISE
REDUCTION

Servo hybrid operation helps reduce continuous pump noise, supporting a quieter and more comfortable shop-floor environment.

100% SERVO MOTOR

Servo-controlled axis movements — including main motor and backgauge — support repeatability and precise bending control.

LOWER MAINTENANCE COST

Integrated design reduces internal complexity and potential failure points, helping speed up service interventions and increase availability.

UP TO 65%
ENERGY SAVINGS

Up to ~65% energy saving potential is reported under comparative benchmark conditions.

REDUCED OIL VOLUME AND LONGER SERVING INTERVAL

A smaller oil volume (130 L tank) supports easier oil management.

SUBSCRIBE E-NEWSLETTER

You can subscribe to the e-bulletin to receive information regarding the developments about Ermaksan

DATA-M LASER PROTRACTOR — DATA-M LASER PROTRACTOR

DATA-M LAZERLİ AÇIÖLÇER

This is the semi-automatic laser-based bending angle measuring device enables the user to determine the exact bending angle for press brakes by a built-in semiconductor laser with line optics and the 1/3” CMOS-camera together with strain gauges – and it works contactlessly.

The bending angle is measured by scanning the projection of the laser beam to the surface of the sheet metal with the CMOS camera. The angle between the laser and the viewing axis of the camera defines the correlation between the position of the line in the camera image and the angle between the sensor and the sheet metal. With a second sensor at the opposite site the bending angle is calculated.

It is mounted on the press brake under an angle of 45° to the die in a working distance of 160-300 mm below the die. It is moveable along the die manually (or automatically). Due to its mounting position the measuring range is 0° to 180°. For each measuring position there are 2 sensors needed.

The sensor accuracy is better than ±0.1°. The system accuracy is influenced by the control, the machine accuracy, the tools and the material. To increase the bending accuracy the sensors were calibrated after mounting. So, the mounting errors are reduced.

The result is a bending angle with a never seen precision just after one bending step regardless of if differences in material properties such as thickness or other.

DATA-M LASER PROTRACTOR — DATA-M LASER PROTRACTOR

DATA-M LAZERLİ AÇIÖLÇER

This is the semi-automatic laser-based bending angle measuring device enables the user to determine the exact bending angle for press brakes by a built-in semiconductor laser with line optics and the 1/3” CMOS-camera together with strain gauges – and it works contactlessly.

The bending angle is measured by scanning the projection of the laser beam to the surface of the sheet metal with the CMOS camera. The angle between the laser and the viewing axis of the camera defines the correlation between the position of the line in the camera image and the angle between the sensor and the sheet metal. With a second sensor at the opposite site the bending angle is calculated.

It is mounted on the press brake under an angle of 45° to the die in a working distance of 160-300 mm below the die. It is moveable along the die manually (or automatically). Due to its mounting position the measuring range is 0° to 180°. For each measuring position there are 2 sensors needed.

The sensor accuracy is better than ±0.1°. The system accuracy is influenced by the control, the machine accuracy, the tools and the material. To increase the bending accuracy the sensors were calibrated after mounting. So, the mounting errors are reduced.

The result is a bending angle with a never seen precision just after one bending step regardless of if differences in material properties such as thickness or other.

KEBA DIGITAL ANGLE GAUGE — KEBA DIGITAL ANGLE GAUGE

KEBA DIGITAL AÇIÖLÇER

The first advantage of this system is allowing the bending of complex shapes easily and accurately within view, especially Z-bends or narrow parts. Complete quality control is possible with this system without any additional time and with maximum accuracy and reproducibility.

KEBA KeMes A200 device procures to see the angles that it measures, on your controller’s screen while communicating with it’s smart Bluetooth USB dongle. It is located on punch easily by the help of the magnets which are inside of it. Device calculates the current angle while bending under favor of lasers which are spreads on a single source. KeMes A200 is easy to use and it has 2 mods which names are “Machine” and “Manual” can make optionally single measurement, continuous measurement and automatic measurement which is called “Machine” mod. The aim of machine mod is analyzing upper beam movements. It can be charged with USB cable and its adapter and its battery life is about 6 hours.

ErTouch controller instantly shows data that is received from sheet with the aid of KEBA integration. After bending is over, ErTouch offers chance to enter correction angles by comparing the angle measured by KeMes A200 and the angle programmed by user. This devices measurement range is between 30° and 150° and its measurement precision is ±0.2°. It has 162 mm width, 48.5 mm height, 15.3 mm depth and measurement results is shown on its high-contrast OLED display.

KEBA DIGITAL ANGLE GAUGE — KEBA DIGITAL ANGLE GAUGE

KEBA DIGITAL AÇIÖLÇER

The first advantage of this system is allowing the bending of complex shapes easily and accurately within view, especially Z-bends or narrow parts. Complete quality control is possible with this system without any additional time and with maximum accuracy and reproducibility.

KEBA KeMes A200 device procures to see the angles that it measures, on your controller’s screen while communicating with it’s smart Bluetooth USB dongle. It is located on punch easily by the help of the magnets which are inside of it. Device calculates the current angle while bending under favor of lasers which are spreads on a single source. KeMes A200 is easy to use and it has 2 mods which names are “Machine” and “Manual” can make optionally single measurement, continuous measurement and automatic measurement which is called “Machine” mod. The aim of machine mod is analyzing upper beam movements. It can be charged with USB cable and its adapter and its battery life is about 6 hours.

ErTouch controller instantly shows data that is received from sheet with the aid of KEBA integration. After bending is over, ErTouch offers chance to enter correction angles by comparing the angle measured by KeMes A200 and the angle programmed by user. This devices measurement range is between 30° and 150° and its measurement precision is ±0.2°. It has 162 mm width, 48.5 mm height, 15.3 mm depth and measurement results is shown on its high-contrast OLED display.

4-AXIS BACKGAUGE — 4-AXIS BACKGAUGE

4 EKSEN ARKA DAYAMA

4-AXIS BACKGAUGE — 4-AXIS BACKGAUGE

4 EKSEN ARKA DAYAMA

5-AXIS BACKGAUGE — 5-AXIS BACKGAUGE

5 EKSEN ARKA DAYAMA

One of the backgauge latches moves within ±100 mm and enables conical bending.

5-AXIS BACKGAUGE — 5-AXIS BACKGAUGE

5 EKSEN ARKA DAYAMA

One of the backgauge latches moves within ±100 mm and enables conical bending.

ATF TYPE 6-AXIS BACKGAUGE SYSTEM — ATF TYPE 6-AXIS BACKGAUGE SYSTEM

6 EKSEN ARKA DAYAMA ATF TİPİ

Precision. Flexibility. Automation.

Ermaksan’s ATF Type Backgauge System is engineered for manufacturers who demand exceptional accuracy and efficiency in complex and multi-step bending operations. Equipped with 6 high-speed servo-controlled axes (X1, X2, R1, R2, Z1, Z2), the system enables:

✅ Precise and fully automatic part positioning, even for asymmetrical or multi-angle parts

✅ Faster setup times, reducing downtime between production batches

✅ Enhanced repeatability and accuracy, critical for high-volume and high-precision bending tasks

✅ Dynamic adaptability to complex geometries, offsets, and irregular part shapes

✅ Improved operator safety and reduced manual adjustments

Designed to work seamlessly with Ermaksan’s advanced press brake models, the ATF backgauge system maximizes throughput and reduces error margins—making it an ideal solution for industries such as aerospace, automotive, defense, and contract metal fabrication.

Technical Highlights

Axes Configuration: X1, X2, R1, R2, Z1, Z2 (independent movement for full flexibility)

Servo Motor Control: High-speed, high-accuracy movement on all axes

CNC Integration: Full compatibility with Delem, ESA, and Cybelec controllers

Robust Construction: Rigid frame and anti-vibration design for consistent performance

Software Support: Offline programming and 3D simulation-ready

Ideal For

Complex parts requiring multi-bend sequences

Variable-size production with frequent part changes

Precision applications where repeatability is critical

Factories aiming to scale with automation and smart manufacturing systems

ATF TYPE 6-AXIS BACKGAUGE SYSTEM — ATF TYPE 6-AXIS BACKGAUGE SYSTEM

6 EKSEN ARKA DAYAMA ATF TİPİ

Precision. Flexibility. Automation.

Ermaksan’s ATF Type Backgauge System is engineered for manufacturers who demand exceptional accuracy and efficiency in complex and multi-step bending operations. Equipped with 6 high-speed servo-controlled axes (X1, X2, R1, R2, Z1, Z2), the system enables:

✅ Precise and fully automatic part positioning, even for asymmetrical or multi-angle parts

✅ Faster setup times, reducing downtime between production batches

✅ Enhanced repeatability and accuracy, critical for high-volume and high-precision bending tasks

✅ Dynamic adaptability to complex geometries, offsets, and irregular part shapes

✅ Improved operator safety and reduced manual adjustments

Designed to work seamlessly with Ermaksan’s advanced press brake models, the ATF backgauge system maximizes throughput and reduces error margins—making it an ideal solution for industries such as aerospace, automotive, defense, and contract metal fabrication.

Technical Highlights

Axes Configuration: X1, X2, R1, R2, Z1, Z2 (independent movement for full flexibility)

Servo Motor Control: High-speed, high-accuracy movement on all axes

CNC Integration: Full compatibility with Delem, ESA, and Cybelec controllers

Robust Construction: Rigid frame and anti-vibration design for consistent performance

Software Support: Offline programming and 3D simulation-ready

Ideal For

Complex parts requiring multi-bend sequences

Variable-size production with frequent part changes

Precision applications where repeatability is critical

Factories aiming to scale with automation and smart manufacturing systems

PNEUMATIC REAR SUPPORTS — PNEUMATIC REAR SUPPORTS

PNÖMATİK ARKA DESTEK DİL GRUBU

Independently operating from the backgauge, they offer improved sheet stabilization during the bending process, particularly when handling large or thin workpieces. These supports help prevent material shifting and enable repeatable, precise results—boosting operator comfort and production efficiency.

PNEUMATIC REAR SUPPORTS — PNEUMATIC REAR SUPPORTS

PNÖMATİK ARKA DESTEK DİL GRUBU

Independently operating from the backgauge, they offer improved sheet stabilization during the bending process, particularly when handling large or thin workpieces. These supports help prevent material shifting and enable repeatable, precise results—boosting operator comfort and production efficiency.

LEUZE MLC510 – REAR SAFETY LIGHT CURTAIN — LEUZE MLC510 – REAR SAFETY LIGHT CURTAIN

LEUZE MLC510 ARKA KORUMA

The LEUZE MLC510 rear light curtain provides Category 4 level safety protection in accordance with IEC 61496 standards. The system continuously monitors the rear working zone using infrared transmitter-receiver pairs and interrupts machine operation upon any detected intrusion.

This ensures operator safety without physical barriers and is ideal for high-throughput environments requiring frequent rear-side access for material handling or process observation.

LEUZE MLC510 – REAR SAFETY LIGHT CURTAIN — LEUZE MLC510 – REAR SAFETY LIGHT CURTAIN

LEUZE MLC510 ARKA KORUMA

The LEUZE MLC510 rear light curtain provides Category 4 level safety protection in accordance with IEC 61496 standards. The system continuously monitors the rear working zone using infrared transmitter-receiver pairs and interrupts machine operation upon any detected intrusion.

This ensures operator safety without physical barriers and is ideal for high-throughput environments requiring frequent rear-side access for material handling or process observation.

REARGUARD+SWITCH — REARGUARD+SWITCH

ARKA KAPALI KAFES+SWITCH

The REARGUARD+SWITCH is a manually operated rear sliding guard system equipped with an integrated safety interlock switch. Its steel-framed structure includes observation windows made of impact-resistant transparent panels, allowing visual monitoring of the internal machine area without removing the guard.

When opened, the interlock switch sends a stop signal to the safety PLC, disabling machine motion and ensuring compliance with EN ISO 14120 and EN ISO 13849-1 safety standards.

REARGUARD+SWITCH — REARGUARD+SWITCH

ARKA KAPALI KAFES+SWITCH

The REARGUARD+SWITCH is a manually operated rear sliding guard system equipped with an integrated safety interlock switch. Its steel-framed structure includes observation windows made of impact-resistant transparent panels, allowing visual monitoring of the internal machine area without removing the guard.

When opened, the interlock switch sends a stop signal to the safety PLC, disabling machine motion and ensuring compliance with EN ISO 14120 and EN ISO 13849-1 safety standards.

MOTORIZED REAR SHUTTER DOOR — MOTORIZED REAR SHUTTER DOOR

PANJUR TİPİ MOTORLU ARKA KORUMA

This motorized rear protection shutter is constructed from interlocking aluminium slats and can be controlled either electrically or manually, depending on configuration. Available in anthracite grey or metallic grey color options, it provides both safety and aesthetic value.

The system includes integrated sensors that communicate with the safety PLC to stop the machine when the shutter is open, ensuring compliance with safety regulations and ease of use in automation environments.

MOTORIZED REAR SHUTTER DOOR — MOTORIZED REAR SHUTTER DOOR

PANJUR TİPİ MOTORLU ARKA KORUMA

This motorized rear protection shutter is constructed from interlocking aluminium slats and can be controlled either electrically or manually, depending on configuration. Available in anthracite grey or metallic grey color options, it provides both safety and aesthetic value.

The system includes integrated sensors that communicate with the safety PLC to stop the machine when the shutter is open, ensuring compliance with safety regulations and ease of use in automation environments.

DOUBLE FOOT PEDAL — DOUBLE FOOT PEDAL

ÇİFT AYAK PEDALI

Ergonomically designed dual foot control pedal enables hands-free and precise control of the bending process. The dual configuration allows flexible operation for both simple and complex bending cycles, enhancing operator safety and comfort.

DOUBLE FOOT PEDAL — DOUBLE FOOT PEDAL

ÇİFT AYAK PEDALI

Ergonomically designed dual foot control pedal enables hands-free and precise control of the bending process. The dual configuration allows flexible operation for both simple and complex bending cycles, enhancing operator safety and comfort.

410 MM THROAT DEPTH — 410 MM THROAT DEPTH

410 MM BOĞAZ DERİNLİĞİ

410 MM THROAT DEPTH — 410 MM THROAT DEPTH

410 MM BOĞAZ DERİNLİĞİ

LASER BENDING LINE - ROLLERI B-LIGHT 01 — LASER BENDING LINE - ROLLERI B-LIGHT 01

LAZER BÜKÜM ÇİZGİSİ - ROLLERI B-LIGHT 01

The Rolleri B-LIGHT 01 system offers a visible laser-guided bend line without relying on the backgauge. It’s easily attachable and removable from the promecam system where the upper die is mounted, making it a time-saving and efficient tool for various bending applications.

LASER BENDING LINE - ROLLERI B-LIGHT 01 — LASER BENDING LINE - ROLLERI B-LIGHT 01

LAZER BÜKÜM ÇİZGİSİ - ROLLERI B-LIGHT 01

The Rolleri B-LIGHT 01 system offers a visible laser-guided bend line without relying on the backgauge. It’s easily attachable and removable from the promecam system where the upper die is mounted, making it a time-saving and efficient tool for various bending applications.

LASER BEND LINE - B-LIGHT 02 — LASER BEND LINE - B-LIGHT 02

LAZER BÜKÜM ÇİZGİSİ - B-LIGHT 02

The B-LIGHT 02 laser bend line system allows operators to clearly see the bending axis without using the backgauge. It is fixed to the upper beam, offering high-accuracy guidance especially during manual alignment or non-standard part bending operations.

LASER BEND LINE - B-LIGHT 02 — LASER BEND LINE - B-LIGHT 02

LAZER BÜKÜM ÇİZGİSİ - B-LIGHT 02

The B-LIGHT 02 laser bend line system allows operators to clearly see the bending axis without using the backgauge. It is fixed to the upper beam, offering high-accuracy guidance especially during manual alignment or non-standard part bending operations.

ELECTRIC PANEL HEATING AND COOLING SYSTEM — ELECTRIC PANEL HEATING AND COOLING SYSTEM

ISITICI VE SOĞUTUCULU PANO

ELECTRIC PANEL HEATING AND COOLING SYSTEM — ELECTRIC PANEL HEATING AND COOLING SYSTEM

ISITICI VE SOĞUTUCULU PANO

TOOL STORAGE CABINET — TOOL STORAGE CABINET

KALIP SAKLAMA DOLABI

TOOL STORAGE CABINET — TOOL STORAGE CABINET

KALIP SAKLAMA DOLABI

ROLLERI TOOL CABINET — ROLLERI TOOL CABINET

ROLLERİ TAKIM DOLABI

ROLLERI TOOL CABINET — ROLLERI TOOL CABINET

ROLLERİ TAKIM DOLABI

CYBELEC VISITOUCH PAC — CYBELEC VISITOUCH PAC

CYBELEC VISITOUCH PAC

19” modern glass-surface touchscreen operable with gloves

CNC unit mounted on the back of the screen with interface module inside the cabinet

Windows 10 operating system with power cut protection and multitasking support

Open software platform for customization

Industry 4.0 ready

2D graphic profile drawing (Touch Profile) and 3D visualization

Automatic bending sequence calculation

User-friendly 2D and numerical programming interface

Full digital communication via EtherCAT and CANopen

Supports all kinematics (X, X relatives, X slave, R, R slave, Z axes; back/front multiple gauges; bending aids)

Tandem operation capability

Tool import and management

Group management for complex production

Preliminary/final bend and hemming management

Integrated angle measurement

Barcode reader support

Modular structure for multi-axis production

CYBELEC VISITOUCH PAC — CYBELEC VISITOUCH PAC

CYBELEC VISITOUCH PAC

19” modern glass-surface touchscreen operable with gloves

CNC unit mounted on the back of the screen with interface module inside the cabinet

Windows 10 operating system with power cut protection and multitasking support

Open software platform for customization

Industry 4.0 ready

2D graphic profile drawing (Touch Profile) and 3D visualization

Automatic bending sequence calculation

User-friendly 2D and numerical programming interface

Full digital communication via EtherCAT and CANopen

Supports all kinematics (X, X relatives, X slave, R, R slave, Z axes; back/front multiple gauges; bending aids)

Tandem operation capability

Tool import and management

Group management for complex production

Preliminary/final bend and hemming management

Integrated angle measurement

Barcode reader support

Modular structure for multi-axis production

CYBELEC VISITOUCH PAC MX — CYBELEC VISITOUCH PAC MX

CYBELEC VISITOUCH PAC MX

19” modern glass-surface touchscreen operable with gloves

CNC unit mounted on the back of the screen with interface module in the cabinet

Windows 10 OS with power cut protection and multitasking support

Industry 4.0 ready with an open software platform for customization

Full digital communication via EtherCAT and CANopen

Programming in 3D, 2D, and numerical modes

Import of part files in DXF, STEP, and IGES formats

Full 3D visualization and simulation

Automatic solutions for complex parts: bend sequencing, gauging, tooling, and auto-segmentation

Supports all kinematics (X, X relatives, X slave, R, R slave, Z axes; back/front multiple gauges; bending aids)

Tandem operation capability

Tool import and management

Group management for complex production

Preliminary/final bend and hemming management

Integrated angle measurement

Barcode reader support

CYBELEC VISITOUCH PAC MX — CYBELEC VISITOUCH PAC MX

CYBELEC VISITOUCH PAC MX

19” modern glass-surface touchscreen operable with gloves

CNC unit mounted on the back of the screen with interface module in the cabinet

Windows 10 OS with power cut protection and multitasking support

Industry 4.0 ready with an open software platform for customization

Full digital communication via EtherCAT and CANopen

Programming in 3D, 2D, and numerical modes

Import of part files in DXF, STEP, and IGES formats

Full 3D visualization and simulation

Automatic solutions for complex parts: bend sequencing, gauging, tooling, and auto-segmentation

Supports all kinematics (X, X relatives, X slave, R, R slave, Z axes; back/front multiple gauges; bending aids)

Tandem operation capability

Tool import and management

Group management for complex production

Preliminary/final bend and hemming management

Integrated angle measurement

Barcode reader support

DELEM DA-66T — DELEM DA-66T

DELEM DA-66T

GENERAL SPECIFICATIONS

2D graphics touch screen programming mode

3D imaging in simulation and production

17” high resolution colour TFT screen

Full-featured Windows application

Standard Profile-LITE offline software

1 GB memory

Product and tool memory 256 MB

USB flash memory drive

Emergency stop button

Alphanumeric product naming

DELEM DA-66T — DELEM DA-66T

DELEM DA-66T

GENERAL SPECIFICATIONS

2D graphics touch screen programming mode

3D imaging in simulation and production

17” high resolution colour TFT screen

Full-featured Windows application

Standard Profile-LITE offline software

1 GB memory

Product and tool memory 256 MB

USB flash memory drive

Emergency stop button

Alphanumeric product naming

DELEM DA-69T — DELEM DA-69T

DELEM DA-69T

GENERAL SPECIFICATIONS

3D and 2D graphics touch screen programming mode

3D and 2D imaging in simulation and production

17” high resolution colour TFT screen

Full-featured Windows application

Profile-T3D offline software

1 GB memory

Product and tool memory 256 MB

USB flash memory drive

Emergency stop button

2D and 3D automatic bending sequence calculation

Graphical product and tool selection

Programmable material properties

Programmable axis speeds

Free material programming

Product and tool search filters

Millimeters / Inch, kN / Ton selection

Stroke counter

Graphic tool configuration

DELEM DA-69T — DELEM DA-69T

DELEM DA-69T

GENERAL SPECIFICATIONS

3D and 2D graphics touch screen programming mode

3D and 2D imaging in simulation and production

17” high resolution colour TFT screen

Full-featured Windows application

Profile-T3D offline software

1 GB memory

Product and tool memory 256 MB

USB flash memory drive

Emergency stop button

2D and 3D automatic bending sequence calculation

Graphical product and tool selection

Programmable material properties

Programmable axis speeds

Free material programming

Product and tool search filters

Millimeters / Inch, kN / Ton selection

Stroke counter

Graphic tool configuration

STANDARD CONTROLLER ARM — STANDARD CONTROLLER ARM

STANDART KONTROLÖR KOLU

The standard pendant arm securely mounts the CNC controller to the machine and allows it to be manually positioned forward or backward when needed. It offers a practical and dependable solution for everyday production needs.

STANDARD CONTROLLER ARM — STANDARD CONTROLLER ARM

STANDART KONTROLÖR KOLU

The standard pendant arm securely mounts the CNC controller to the machine and allows it to be manually positioned forward or backward when needed. It offers a practical and dependable solution for everyday production needs.

HEIGHT ADJUSTABLE CNC PENDANT ARM — HEIGHT ADJUSTABLE CNC PENDANT ARM

YÜKSEKLİK AYARLI KONTROL KOLU

The height-adjustable pendant arm is designed for workstations shared by multiple operators. It allows easy adjustment of the controller's height, ensuring ergonomic comfort and efficient control for all users.

HEIGHT ADJUSTABLE CNC PENDANT ARM — HEIGHT ADJUSTABLE CNC PENDANT ARM

YÜKSEKLİK AYARLI KONTROL KOLU

The height-adjustable pendant arm is designed for workstations shared by multiple operators. It allows easy adjustment of the controller's height, ensuring ergonomic comfort and efficient control for all users.

LED BAR GUIDING SYSTEM — LED BAR GUIDING SYSTEM

LED BAR KLAVUZ SİSTEMİ

LED BAR GUIDING SYSTEM — LED BAR GUIDING SYSTEM

LED BAR KLAVUZ SİSTEMİ

WILA SMART TOOL LOCATOR — WILA SMART TOOL LOCATOR

WILA SMART TOOL LOCATOR

The WILA Smart Tool Locator is an advanced positioning system that mounts full-length to the upper beam. Using laser beam technology, it precisely determines the optimal sequence for segmented punches installed in the upper tool holder during bending operations.

System Features

Laser Beam Technology - High-precision laser beam system clearly marks tool positions and provides visual guidance for accurate placement.

Full-Length Mounting - Complete upper beam integration ensures effective positioning capabilities across the entire tool length.

Intelligent Sequence Detection - Automatically calculates and displays the optimal punch arrangement based on specific bending operation requirements.

Seamless Integration - Easy integration with existing upper tool holder systems without modification requirements.

Rapid Setup - Completes complex tool arrangement calculations in seconds, significantly reducing operation time.

The Smart Tool Locator transforms tool positioning from guesswork into a science-based process. With laser guidance, every segmented punch finds its correct position on the first attempt.

Maximize production efficiency with precision tool positioning. Contact us for detailed information about the WILA Smart Tool Locator.

WILA SMART TOOL LOCATOR — WILA SMART TOOL LOCATOR

WILA SMART TOOL LOCATOR

The WILA Smart Tool Locator is an advanced positioning system that mounts full-length to the upper beam. Using laser beam technology, it precisely determines the optimal sequence for segmented punches installed in the upper tool holder during bending operations.

System Features

Laser Beam Technology - High-precision laser beam system clearly marks tool positions and provides visual guidance for accurate placement.

Full-Length Mounting - Complete upper beam integration ensures effective positioning capabilities across the entire tool length.

Intelligent Sequence Detection - Automatically calculates and displays the optimal punch arrangement based on specific bending operation requirements.

Seamless Integration - Easy integration with existing upper tool holder systems without modification requirements.

Rapid Setup - Completes complex tool arrangement calculations in seconds, significantly reducing operation time.

The Smart Tool Locator transforms tool positioning from guesswork into a science-based process. With laser guidance, every segmented punch finds its correct position on the first attempt.

Maximize production efficiency with precision tool positioning. Contact us for detailed information about the WILA Smart Tool Locator.

CENTRAL LUBRICATING SYSTEM — CENTRAL LUBRICATING SYSTEM

MERKEZİ YAĞLAMA SİSTEMİ

The central lubricating system automatically delivers precise lubrication to critical machine components, ensuring longer service life and reduced maintenance needs without requiring operator intervention. Its automatic skid lubrication system further enhances durability by distributing oil from the reservoir to targeted areas via a grease pump, distributor, and hoses at set intervals, keeping the machine in optimal working condition.

CENTRAL LUBRICATING SYSTEM — CENTRAL LUBRICATING SYSTEM

MERKEZİ YAĞLAMA SİSTEMİ

The central lubricating system automatically delivers precise lubrication to critical machine components, ensuring longer service life and reduced maintenance needs without requiring operator intervention. Its automatic skid lubrication system further enhances durability by distributing oil from the reservoir to targeted areas via a grease pump, distributor, and hoses at set intervals, keeping the machine in optimal working condition.

L TYPE SLIDING FRONT SUPPORT ARM — L TYPE SLIDING FRONT SUPPORT ARM

L TİPİ ÖN KAYAR KOL

L TYPE SLIDING FRONT SUPPORT ARM — L TYPE SLIDING FRONT SUPPORT ARM

L TİPİ ÖN KAYAR KOL

AP3-AP4 FRONT SUPPORT ARMS SYSTEM — AP3-AP4 FRONT SUPPORT ARMS SYSTEM

AP3-AP4 ÖN KOL SİSTEMİ

The AP3-AP4 Front Support Arms System is an intelligent sheet support solution developed to prevent deformation in thin, flexible sheets during bending. It is particularly effective in applications where the skirt (flange) length is large, which can cause the sheet edge to flex downward, resulting in poor part quality and operator difficulty.

By lifting the sheet from below and following the bending path, this system eliminates downward deflection, ensuring that the workpiece maintains its shape throughout the process. The result is more precise, consistent, and operator-friendly bending.

Key Technical Advantages:

Prevents deformation caused by edge flexing during bending

Follows the bending path, providing dynamic support from below

Improves operator ergonomics and increases safety

Delivers consistent bending quality, even in repetitive operations

Ideal for large-format parts made of thin or lightweight material

The AP3-AP4 Front Support Arms System is engineered to elevate your bending operations by enhancing precision, repeatability, and operator comfort.

AP3-AP4 FRONT SUPPORT ARMS SYSTEM — AP3-AP4 FRONT SUPPORT ARMS SYSTEM

AP3-AP4 ÖN KOL SİSTEMİ

The AP3-AP4 Front Support Arms System is an intelligent sheet support solution developed to prevent deformation in thin, flexible sheets during bending. It is particularly effective in applications where the skirt (flange) length is large, which can cause the sheet edge to flex downward, resulting in poor part quality and operator difficulty.

By lifting the sheet from below and following the bending path, this system eliminates downward deflection, ensuring that the workpiece maintains its shape throughout the process. The result is more precise, consistent, and operator-friendly bending.

Key Technical Advantages:

Prevents deformation caused by edge flexing during bending

Follows the bending path, providing dynamic support from below

Improves operator ergonomics and increases safety

Delivers consistent bending quality, even in repetitive operations

Ideal for large-format parts made of thin or lightweight material

The AP3-AP4 Front Support Arms System is engineered to elevate your bending operations by enhancing precision, repeatability, and operator comfort.

SIDE CAGE+SWITCH+AKASII — SIDE CAGE+SWITCH+AKASII

YAN KAFES+SWITCH+AKASII (MOTORSUZ)

If the object is moved out of the way, the jaw continues to move. Height adjustment is done manually.

SIDE CAGE+SWITCH+AKASII — SIDE CAGE+SWITCH+AKASII

YAN KAFES+SWITCH+AKASII (MOTORSUZ)

If the object is moved out of the way, the jaw continues to move. Height adjustment is done manually.

SIDE CAGE+SWITCH+AKASII — SIDE CAGE+SWITCH+AKASII

YAN KAFES+SWITCH+AKASII (MOTORLU)

If the object is moved out of the way, the jaw continues its movement. Once calibrated, it automatically adjusts the height when the upper mould is changed.

SIDE CAGE+SWITCH+AKASII — SIDE CAGE+SWITCH+AKASII

YAN KAFES+SWITCH+AKASII (MOTORLU)

If the object is moved out of the way, the jaw continues its movement. Once calibrated, it automatically adjusts the height when the upper mould is changed.

SIDE CAGE+SWITCH+DSP AP MCS — SIDE CAGE+SWITCH+DSP AP MCS

YAN KAFES+SWITCH+DSP AP MCS

SIDE CAGE+SWITCH+DSP AP MCS — SIDE CAGE+SWITCH+DSP AP MCS

YAN KAFES+SWITCH+DSP AP MCS

SIDE CAGE+SWITCH+LASERSAFE IRIS — SIDE CAGE+SWITCH+LASERSAFE IRIS

YAN KAFES+SWITCH+LASERSAFE IRIS

If the object is moved out of the way, the jaw movement continues. If the object continues to stand in between, the jaw movement continues at slow speed (manually).

SIDE CAGE+SWITCH+LASERSAFE IRIS — SIDE CAGE+SWITCH+LASERSAFE IRIS

YAN KAFES+SWITCH+LASERSAFE IRIS

If the object is moved out of the way, the jaw movement continues. If the object continues to stand in between, the jaw movement continues at slow speed (manually).

SIDE CAGE+SWITCH+LASERSAFE IRIS PLUS — SIDE CAGE+SWITCH+LASERSAFE IRIS PLUS

YAN KAFES+SWITCH+LASERSAFE IRIS PLUS

The system, which can also be used as front finger protection, stops the movement of the upper jaw when it detects any object. If the object is removed, the jaw continues its movement. If the object continues to stand in between, the jaw movement continues at slow speed (manually).

SIDE CAGE+SWITCH+LASERSAFE IRIS PLUS — SIDE CAGE+SWITCH+LASERSAFE IRIS PLUS

YAN KAFES+SWITCH+LASERSAFE IRIS PLUS

The system, which can also be used as front finger protection, stops the movement of the upper jaw when it detects any object. If the object is removed, the jaw continues its movement. If the object continues to stand in between, the jaw movement continues at slow speed (manually).

SIDE CAGE+SWITCH+LASERSAFE — SIDE CAGE+SWITCH+LASERSAFE

YAN KAFES+SWITCH+LAZERSAFE

If the object is moved out of the way, the jaw movement continues. If the object continues to stand in the way, the jaw movement continues at a slow speed (manually).

SIDE CAGE+SWITCH+LASERSAFE — SIDE CAGE+SWITCH+LASERSAFE

YAN KAFES+SWITCH+LAZERSAFE

If the object is moved out of the way, the jaw movement continues. If the object continues to stand in the way, the jaw movement continues at a slow speed (manually).

BARCODE READER — BARCODE READER

BARKOD OKUYUCU

In order to facilitate work processes and prevent errors, the programme is loaded automatically by reading the code from the sheet or anywhere else. Thus, your production times are reduced and your productivity increases.

BARCODE READER — BARCODE READER

BARKOD OKUYUCU

In order to facilitate work processes and prevent errors, the programme is loaded automatically by reading the code from the sheet or anywhere else. Thus, your production times are reduced and your productivity increases.

FULLY AUTOMATED ROBOTIC BENDING SYSTEMS — FULLY AUTOMATED ROBOTIC BENDING SYSTEMS

TAM OTOMATİK ROBOTİK BÜKME SİSTEMLERİ

Ermaksan’s robotic press brake solutions take metal fabrication to the next level by seamlessly integrating advanced robotics with high-precision press brakes. This integrated system automates the entire bending cycle, from precise picking and bending to depositing sheet metal, effectively reducing manual handling and significantly boosting productivity and consistency.

Our robotic systems enable high-speed, repeatable bending processes, enhancing both quality and throughput. Designed for flexibility, Ermaksan’s robotic press brakes cater to a wide range of metal fabrication needs, ensuring precision while minimizing operator intervention. They also improve safety by reducing manual handling on the production floor.

Why Choose Ermaksan’s Robotic Bending Systems?

Increased Productivity: Achieve faster, more consistent production cycles with automation.

Enhanced Precision & Quality: Improve bending accuracy and ensure top-quality results with advanced robotic integration.

Flexible Operations: Adapt to varying workloads and material specifications, easily handling complex bending tasks.

Safety & Efficiency: Reduce manual intervention and enhance safety, maximizing both operator and workplace efficiency.

Streamline Your Bending Process with Ermaksan
Our robotic press brakes combine precision with automation to optimize your bending operations. By automating the entire bending cycle, Ermaksan’s solutions improve speed, accuracy, and overall performance, driving both productivity and flexibility.

Elevate your metal fabrication processes today with Ermaksan’s robotic press brake solutions—the future of automated metal bending technology.

FULLY AUTOMATED ROBOTIC BENDING SYSTEMS — FULLY AUTOMATED ROBOTIC BENDING SYSTEMS

TAM OTOMATİK ROBOTİK BÜKME SİSTEMLERİ

Ermaksan’s robotic press brake solutions take metal fabrication to the next level by seamlessly integrating advanced robotics with high-precision press brakes. This integrated system automates the entire bending cycle, from precise picking and bending to depositing sheet metal, effectively reducing manual handling and significantly boosting productivity and consistency.

Our robotic systems enable high-speed, repeatable bending processes, enhancing both quality and throughput. Designed for flexibility, Ermaksan’s robotic press brakes cater to a wide range of metal fabrication needs, ensuring precision while minimizing operator intervention. They also improve safety by reducing manual handling on the production floor.

Why Choose Ermaksan’s Robotic Bending Systems?

Increased Productivity: Achieve faster, more consistent production cycles with automation.

Enhanced Precision & Quality: Improve bending accuracy and ensure top-quality results with advanced robotic integration.

Flexible Operations: Adapt to varying workloads and material specifications, easily handling complex bending tasks.

Safety & Efficiency: Reduce manual intervention and enhance safety, maximizing both operator and workplace efficiency.

Streamline Your Bending Process with Ermaksan
Our robotic press brakes combine precision with automation to optimize your bending operations. By automating the entire bending cycle, Ermaksan’s solutions improve speed, accuracy, and overall performance, driving both productivity and flexibility.

Elevate your metal fabrication processes today with Ermaksan’s robotic press brake solutions—the future of automated metal bending technology.

START-STOP — START-STOP

START-STOP

START-STOP — START-STOP

START-STOP

START-STOP + SOFT STARTER — START-STOP + SOFT STARTER

START-STOP + SOFT STARTER

START-STOP + SOFT STARTER — START-STOP + SOFT STARTER

START-STOP + SOFT STARTER

RULER ON TOP BEAM — RULER ON TOP BEAM

ÜST ÇENE ÜZERİNE CETVEL

RULER ON TOP BEAM — RULER ON TOP BEAM

ÜST ÇENE ÜZERİNE CETVEL

Backgauge — Backgauge

Arka Dayama

Backgauge — Backgauge

Arka Dayama

Throat Depth — Throat Depth

Boğaz Derinliği

Throat Depth — Throat Depth

Boğaz Derinliği

Angle Gauge — Angle Gauge

Açıölçer

Angle Gauge — Angle Gauge

Açıölçer

Ruler — Ruler

Cetvel

Ruler — Ruler

Cetvel

Front Protection — Front Protection

Ön Koruma

Front Protection — Front Protection

Ön Koruma

Front Support Arms — Front Support Arms

Ön Kollar

Front Support Arms — Front Support Arms

Ön Kollar

Back Protection — Back Protection

Arka Koruma

Back Protection — Back Protection

Arka Koruma

Controller — Controller

Kontrolör

Controller — Controller

Kontrolör

Foot Pedal — Foot Pedal

Ayak Pedalı

Foot Pedal — Foot Pedal

Ayak Pedalı

Crowning System — Crowning System

Bombeleme Sistemi

Crowning System — Crowning System

Bombeleme Sistemi

Electric Panel Heating - Cooling — Electric Panel Heating - Cooling

Elektrik Pano Isıtma-Soğutmalı

Electric Panel Heating - Cooling — Electric Panel Heating - Cooling

Elektrik Pano Isıtma-Soğutmalı

Hydraulic System — Hydraulic System

Hidrolik Sistem

Hydraulic System — Hydraulic System

Hidrolik Sistem

Bending Line — Bending Line

Büküm Çizgisi

Bending Line — Bending Line

Büküm Çizgisi

Rear Support — Rear Support

Arka Destek Dil Grubu

Rear Support — Rear Support

Arka Destek Dil Grubu

Bending Automation – Robot & Cobot Solutions — Bending Automation – Robot & Cobot Solutions

Bükme Otomasyonu – Robot & Cobot Çözümleri

Bending Automation – Robot & Cobot Solutions — Bending Automation – Robot & Cobot Solutions

Bükme Otomasyonu – Robot & Cobot Çözümleri

Tool Storage Cabinet — Tool Storage Cabinet

Kalıp Saklama Dolabı

Tool Storage Cabinet — Tool Storage Cabinet

Kalıp Saklama Dolabı

Pendant Arm — Pendant Arm

Kontrolör Kolu

Pendant Arm — Pendant Arm

Kontrolör Kolu

Lubrication System — Lubrication System

Yağlama Sistemi

Lubrication System — Lubrication System

Yağlama Sistemi

MOTORISED CROWNING SYSTEM — MOTORISED CROWNING SYSTEM

MOTORLU BOMBELEME

In bending operations, natural deflection in the machine frame causes varying bend angles between the center and ends of the workpiece, especially in long parts. The CNC-controlled motorised crowning system eliminates this issue, ensuring consistent and accurate bend angles across the entire length of the workpiece.

Fully integrated with the CNC controller, the system automatically adjusts crowning during bending. This delivers high precision and repeatability without the need for manual intervention.

Advantages

Fully Automatic Adjustment: Automatic crowning compensation based on CNC bending parameters.

Perfect Precision: Consistent and even bend angles along the whole part.

Time Savings: Eliminates manual adjustment, increasing production speed.

High Efficiency: Maximum performance in mass production.

Low Error Rate: Prevents human adjustment errors.

Quality Assurance: Accurate results in a single pass, minimal scrap.

The CNC-controlled motorised crowning system delivers superior quality, speed, and reliability for applications where precision and production capacity are essential.

Discover it now and take your production quality to the next level.

MOTORISED CROWNING SYSTEM — MOTORISED CROWNING SYSTEM

MOTORLU BOMBELEME

In bending operations, natural deflection in the machine frame causes varying bend angles between the center and ends of the workpiece, especially in long parts. The CNC-controlled motorised crowning system eliminates this issue, ensuring consistent and accurate bend angles across the entire length of the workpiece.

Fully integrated with the CNC controller, the system automatically adjusts crowning during bending. This delivers high precision and repeatability without the need for manual intervention.

Advantages

Fully Automatic Adjustment: Automatic crowning compensation based on CNC bending parameters.

Perfect Precision: Consistent and even bend angles along the whole part.

Time Savings: Eliminates manual adjustment, increasing production speed.

High Efficiency: Maximum performance in mass production.

Low Error Rate: Prevents human adjustment errors.

Quality Assurance: Accurate results in a single pass, minimal scrap.

The CNC-controlled motorised crowning system delivers superior quality, speed, and reliability for applications where precision and production capacity are essential.

Discover it now and take your production quality to the next level.

ERGONOMIC CONTROLLER ARM — ERGONOMIC CONTROLLER ARM

ERGONOMİK KONTOLÖR KOLU

The ergonomic pendant arm allows smooth lateral and front-back movement, enabling the operator to adjust the control panel easily for optimal access. Ideal for workspaces where frequent repositioning is needed.

ERGONOMIC CONTROLLER ARM — ERGONOMIC CONTROLLER ARM

ERGONOMİK KONTOLÖR KOLU

The ergonomic pendant arm allows smooth lateral and front-back movement, enabling the operator to adjust the control panel easily for optimal access. Ideal for workspaces where frequent repositioning is needed.

HAWE EPRAX HYDRAULIC SYSTEM — HAWE EPRAX HYDRAULIC SYSTEM

HAWE EPRAX HİDROLİK SİSTEM

It has a special closed circuit hydraulic system. It requires minimum maintenance compared to hydraulic machines.

HAWE EPRAX HYDRAULIC SYSTEM — HAWE EPRAX HYDRAULIC SYSTEM

HAWE EPRAX HİDROLİK SİSTEM

It has a special closed circuit hydraulic system. It requires minimum maintenance compared to hydraulic machines.

COBOT-INTEGRATED BENDING SYSTEMS — COBOT-INTEGRATED BENDING SYSTEMS

COBOT ENTEGRELİ BÜKME SİSTEMLERİ

Discover the next generation of sheet metal bending with Ermaksan’s press brakes, seamlessly integrated with advanced cobot solutions. These cobot-powered systems manage material feeding, positioning, and secure holding, enabling precise and efficient bending processes. This integration enhances productivity, simplifies complex tasks, and optimizes production workflows, saving valuable time and resources.

Designed for modern manufacturing, our cobot-integrated press brakes offer flexible, efficient solutions—even for intricate bending requirements. Featuring an intuitive, user-friendly interface, these cobots are easy to program and require minimal training. Setting up a bending sequence is as simple as placing the cobot in free-drive mode: the operator guides the cobot through each step while the software records the precise movements and speeds.

A unique feature of our cobots is the two control buttons on the 6th axis, where the vacuum holder is located. By pressing these buttons, the operator can move the robot manually, guiding its trajectory without needing a teach pendant or specialized software knowledge. The cobot’s sensors respond to the force applied by the operator, allowing easy, hands-on teaching of the bending path. This approach removes the need for conventional programming, making automation accessible to all users. Manual operation can also be resumed anytime without requiring major adjustments.

The system is CE-compliant and can operate safely alongside the operator without light or safety barriers, as the robot stops immediately upon any impact. Ermaksan’s cobot-integrated press brakes bring flexibility, cost-efficiency, and optimized performance to your manufacturing operations, empowering you to elevate productivity with ease.

Choosing a cobot-integrated bending system allows you to enjoy the benefits of automation without the significant upfront costs and safety requirements associated with traditional robotic cells.

COBOT-INTEGRATED BENDING SYSTEMS — COBOT-INTEGRATED BENDING SYSTEMS

COBOT ENTEGRELİ BÜKME SİSTEMLERİ

Discover the next generation of sheet metal bending with Ermaksan’s press brakes, seamlessly integrated with advanced cobot solutions. These cobot-powered systems manage material feeding, positioning, and secure holding, enabling precise and efficient bending processes. This integration enhances productivity, simplifies complex tasks, and optimizes production workflows, saving valuable time and resources.

Designed for modern manufacturing, our cobot-integrated press brakes offer flexible, efficient solutions—even for intricate bending requirements. Featuring an intuitive, user-friendly interface, these cobots are easy to program and require minimal training. Setting up a bending sequence is as simple as placing the cobot in free-drive mode: the operator guides the cobot through each step while the software records the precise movements and speeds.

A unique feature of our cobots is the two control buttons on the 6th axis, where the vacuum holder is located. By pressing these buttons, the operator can move the robot manually, guiding its trajectory without needing a teach pendant or specialized software knowledge. The cobot’s sensors respond to the force applied by the operator, allowing easy, hands-on teaching of the bending path. This approach removes the need for conventional programming, making automation accessible to all users. Manual operation can also be resumed anytime without requiring major adjustments.

The system is CE-compliant and can operate safely alongside the operator without light or safety barriers, as the robot stops immediately upon any impact. Ermaksan’s cobot-integrated press brakes bring flexibility, cost-efficiency, and optimized performance to your manufacturing operations, empowering you to elevate productivity with ease.

Choosing a cobot-integrated bending system allows you to enjoy the benefits of automation without the significant upfront costs and safety requirements associated with traditional robotic cells.

SLIDING DOOR REAR GUARD — SLIDING DOOR REAR GUARD

SÜRGÜLÜ ARKA KORUMA

This manually operable horizontal sliding rear guard is available in custom colors, including body-matched or safety orange. It is designed to restrict access to the rear hazard zone of the press brake while allowing for simple manual operation.

Integrated safety switches halt machine operation when the door is not fully closed, ensuring operator safety and conformity with CE machinery safety directives.

SLIDING DOOR REAR GUARD — SLIDING DOOR REAR GUARD

SÜRGÜLÜ ARKA KORUMA

This manually operable horizontal sliding rear guard is available in custom colors, including body-matched or safety orange. It is designed to restrict access to the rear hazard zone of the press brake while allowing for simple manual operation.

Integrated safety switches halt machine operation when the door is not fully closed, ensuring operator safety and conformity with CE machinery safety directives.

MITUTOYO UNIVERSAL ANGLE GAUGE — MITUTOYO UNIVERSAL ANGLE GAUGE

MITUTOYO UNIVERSAL AÇI ÖLÇER

Can easily read measurements through a clear screen.

Can easily transfer your measurement data to the controller with its Bluetooth feature and provide correction to the value to obtain more accurate results.

When not active, it will turn itself off after 10 minutes and save up to 200 hours of battery.

MITUTOYO UNIVERSAL ANGLE GAUGE — MITUTOYO UNIVERSAL ANGLE GAUGE

MITUTOYO UNIVERSAL AÇI ÖLÇER

Can easily read measurements through a clear screen.

Can easily transfer your measurement data to the controller with its Bluetooth feature and provide correction to the value to obtain more accurate results.

When not active, it will turn itself off after 10 minutes and save up to 200 hours of battery.

X5 BACKGAUGE FINGER GROUP — X5 BACKGAUGE FINGER GROUP

X5 ARKA DAYAMA DİL GRUBU

This advanced system is designed to meet the demands of complex bending operations where high repeatability and precise alignment are essential. Its rapid positioning capability reduces cycle times and increases overall efficiency—making it the perfect solution for versatile and high-performance bending applications.

X5 BACKGAUGE FINGER GROUP — X5 BACKGAUGE FINGER GROUP

X5 ARKA DAYAMA DİL GRUBU

This advanced system is designed to meet the demands of complex bending operations where high repeatability and precise alignment are essential. Its rapid positioning capability reduces cycle times and increases overall efficiency—making it the perfect solution for versatile and high-performance bending applications.

U TYPE SLIDING FRONT SUPPORT ARM — U TYPE SLIDING FRONT SUPPORT ARM

U TİPİ ÖN KAYAR KOL

U TYPE SLIDING FRONT SUPPORT ARM — U TYPE SLIDING FRONT SUPPORT ARM

U TİPİ ÖN KAYAR KOL

WIDE TYPE FRONT SLIDING ARM — WIDE TYPE FRONT SLIDING ARM

GENİŞ TİP BİLYALI ÖN KAYAR KOL

WIDE TYPE FRONT SLIDING ARM — WIDE TYPE FRONT SLIDING ARM

GENİŞ TİP BİLYALI ÖN KAYAR KOL

DELEM DA - 69S — DELEM DA - 69S

DELEM DA - 69S

3D and 2D Graphic Touch Screen Programming Mode

3D and 2D Imaging in Simulation and Manufacturing

24” high-resolution color TFT display

Fully Equipped Windows App

Profile-T3D Offline Software

4 GB Memory

Product and Tool Memory

USB flash Memory Drive

2D and 3D Automatic Bending Sequence Calculation

Programmable Material Specifications

Programmable Axis Speeds

Free Material Programming

Product and Tool Search Filters

Millimeter / Inch, kN / Ton Selection

Stock Counter

Graphic Tool Configuration

Emergency Stop Button

Graphical Product and Tool Selection

DELEM DA - 69S — DELEM DA - 69S

DELEM DA - 69S

3D and 2D Graphic Touch Screen Programming Mode

3D and 2D Imaging in Simulation and Manufacturing

24” high-resolution color TFT display

Fully Equipped Windows App

Profile-T3D Offline Software

4 GB Memory

Product and Tool Memory

USB flash Memory Drive

2D and 3D Automatic Bending Sequence Calculation

Programmable Material Specifications

Programmable Axis Speeds

Free Material Programming

Product and Tool Search Filters

Millimeter / Inch, kN / Ton Selection

Stock Counter

Graphic Tool Configuration

Emergency Stop Button

Graphical Product and Tool Selection

DELEM DA - 66S — DELEM DA - 66S

DELEM DA - 66S

3D(O) and 2D Graphic Touch Screen Programming Mode

2D+ and 2D Imaging in Simulation and Production

24” high-resolution color TFT display

Fully Equipped Windows App

Profile-LT Offline Software

4 GB Memory

Product and Tool Memory

USB flash Memory Drive

2D and 2D+ Automatic Bending Sequence Calculation

Programmable Material Specifications

Programmable Axis Speeds

Free Material Programming

Product and Tool Search Filters

Millimeter / Inch, kN / Ton Selection

Stock Counter

Graphic Tool Configuration

Emergency Stop Button

Graphical Product and Tool Selection

DELEM DA - 66S — DELEM DA - 66S

DELEM DA - 66S

3D(O) and 2D Graphic Touch Screen Programming Mode

2D+ and 2D Imaging in Simulation and Production

24” high-resolution color TFT display

Fully Equipped Windows App

Profile-LT Offline Software

4 GB Memory

Product and Tool Memory

USB flash Memory Drive

2D and 2D+ Automatic Bending Sequence Calculation

Programmable Material Specifications

Programmable Axis Speeds

Free Material Programming

Product and Tool Search Filters

Millimeter / Inch, kN / Ton Selection

Stock Counter

Graphic Tool Configuration

Emergency Stop Button

Graphical Product and Tool Selection

Smart Features — Smart Features

Akıllı Özellikler

Smart Features — Smart Features

Akıllı Özellikler

Automation System — Automation System

Otomasyon Yazılımı

Automation System — Automation System

Otomasyon Yazılımı

ER 4.0 – INDUSTRY 4.0 — ER 4.0 – INDUSTRY 4.0

ER 4.0 – ENDÜSTRİ 4.0

ER 4.0 is Ermaksan’s proprietary Industry 4.0 software solution designed to digitalize sheet metal processing machines and production equipment. It provides real-time monitoring, performance analytics, and process optimization, enabling manufacturers to take full control of their operations through smart and connected technologies.

With its intuitive interface, ER 4.0 collects and visualizes machine data from the shop floor to help manufacturers make informed decisions and increase productivity. Its ability to integrate with ERP systems builds a seamless digital bridge between operations and management, supporting data-driven efficiency across the organization.

Key Benefits:

Real-time traceability and data-driven decision-making

Enhanced machine and process efficiency

Downtime tracking for production lines

Digital maintenance and performance tracking

Easy integration with ERP systems

ALL INTEGRATED

Integrate your machine data with your MES and ERP applications.

ALL THE DATA

Record your machine historic performance data. Track your machine Job and Operator performance.

ALL THE MACHINES

Enable all your production line to be monitored. Retrofit you existing machines to our Industry 4.0 platform.

ANY WHERE

Monitor and track machine performance over the flexible easy to use WEB interface from any where

ANY TIME

Reach your machine performance data any time you like.

EFFICIENCY GRAPH OF THE MACHINE FOR THE LAST WEEK

Generates a trend graph by compiling the operational information of the machine. Operation performance for the previous week may be monitored.

DETAILED INFORMATION OF THE LAST WORK COMPLETED

Indicates all the details of the work done, and information such as how long it did take the operator to complete which work and in what way.

OEE VALUES OF THE MACHINE

Collects all the information during the stand-by, production and preparation processes to generate a general productivity chart.

EQUIPMENT DATA

It shows the instantaneous data of the operational elements of the machines as trend graph.

MACHINE MONITORING SCREEN

You may monitor your machines in different fields from a single screen.

STATUS OF THE MACHINES

This provides the lists of the operational and non-operational machines on the field and the summary of their operation.

ER 4.0 – INDUSTRY 4.0 — ER 4.0 – INDUSTRY 4.0

ER 4.0 – ENDÜSTRİ 4.0

ER 4.0 is Ermaksan’s proprietary Industry 4.0 software solution designed to digitalize sheet metal processing machines and production equipment. It provides real-time monitoring, performance analytics, and process optimization, enabling manufacturers to take full control of their operations through smart and connected technologies.

With its intuitive interface, ER 4.0 collects and visualizes machine data from the shop floor to help manufacturers make informed decisions and increase productivity. Its ability to integrate with ERP systems builds a seamless digital bridge between operations and management, supporting data-driven efficiency across the organization.

Key Benefits:

Real-time traceability and data-driven decision-making

Enhanced machine and process efficiency

Downtime tracking for production lines

Digital maintenance and performance tracking

Easy integration with ERP systems

ALL INTEGRATED

Integrate your machine data with your MES and ERP applications.

ALL THE DATA

Record your machine historic performance data. Track your machine Job and Operator performance.

ALL THE MACHINES

Enable all your production line to be monitored. Retrofit you existing machines to our Industry 4.0 platform.

ANY WHERE

Monitor and track machine performance over the flexible easy to use WEB interface from any where

ANY TIME

Reach your machine performance data any time you like.

EFFICIENCY GRAPH OF THE MACHINE FOR THE LAST WEEK

Generates a trend graph by compiling the operational information of the machine. Operation performance for the previous week may be monitored.

DETAILED INFORMATION OF THE LAST WORK COMPLETED

Indicates all the details of the work done, and information such as how long it did take the operator to complete which work and in what way.

OEE VALUES OF THE MACHINE

Collects all the information during the stand-by, production and preparation processes to generate a general productivity chart.

EQUIPMENT DATA

It shows the instantaneous data of the operational elements of the machines as trend graph.

MACHINE MONITORING SCREEN

You may monitor your machines in different fields from a single screen.

STATUS OF THE MACHINES

This provides the lists of the operational and non-operational machines on the field and the summary of their operation.

Fiessler Angle Measurement System — Fiessler Angle Measurement System

Fiessler Açı Ölçüm Sistemi

The Fiessler Angle Measurement System provides real-time bending angle data during press brake operations to support higher repeatability and reduced angle variation caused by springback and material behavior. With fast installation and retrofit-friendly use, it fits flexible production and quality control needs.

In press brake bending, final angle can vary due to thickness variation, material properties, and springback. Fiessler’s system monitors the bend angle during forming and supplies continuous feedback to support a more predictable, standardized process.
Its modular, quick-mount approach makes angle measurement available only when needed—an advantage for quality control, short runs, and retrofit upgrades on existing machines.

Key benefits

Real-time angle measurement: Continuous feedback for more consistent bends

Springback support: Helps reduce angle deviations linked to material behavior

Flexible use: Suitable for retrofit, temporary use, and quality control workflows

Controller integration: Can be integrated with common NC/CNC controllers (e.g., Delem, Cybelec, ESA, etc.)

Fiessler Angle Measurement System — Fiessler Angle Measurement System

Fiessler Açı Ölçüm Sistemi

The Fiessler Angle Measurement System provides real-time bending angle data during press brake operations to support higher repeatability and reduced angle variation caused by springback and material behavior. With fast installation and retrofit-friendly use, it fits flexible production and quality control needs.

In press brake bending, final angle can vary due to thickness variation, material properties, and springback. Fiessler’s system monitors the bend angle during forming and supplies continuous feedback to support a more predictable, standardized process.
Its modular, quick-mount approach makes angle measurement available only when needed—an advantage for quality control, short runs, and retrofit upgrades on existing machines.

Key benefits

Real-time angle measurement: Continuous feedback for more consistent bends

Springback support: Helps reduce angle deviations linked to material behavior

Flexible use: Suitable for retrofit, temporary use, and quality control workflows

Controller integration: Can be integrated with common NC/CNC controllers (e.g., Delem, Cybelec, ESA, etc.)